Three important points in bus routing are designing for consistent trace impedance, proper termination, and a tight ground return path to minimize loop inductance. As some designers may question the wisdom of right angle turns in bus routing, I’ll address that point here as well. If you’re working on a new PCB design and you need to route a bus between different devices, there are some simple rules to follow to ensure your signals aren’t distorted and that successive devices are triggered correctly. The same goes for many digital systems that manipulate data in parallel. Harness Entries Grid - the grid lists all of the harness entries currently defined for the harness connector.Modern computing simply wouldn’t be possible without PCB bus routing and layout.Use this region to manage the connector's associated harness entries. Fill - click on the colored box to access a drop-down from which you can select the default color.Click on the colored box to the right of the selections to access a drop-down from which you can select the default color. Border - use the drop-down to select the default from the available choices: Smallest, Small, Medium, and Large.Primary Position - enter the primary position.Bus Text Style - use the drop-down to select the style: Full or Prefix.Harness Type - enter the name of the harness.Choices are: 0 Degrees, 90 Degrees, 180 Degrees, and 270 Degrees. Rotation - use the drop-down to select the rotation.The value can be entered in either metric or imperial include the units when entering a value whose units are not the current default. Edit to change the Y position of the object. Y (second field) - The current Y (vertical) coordinate of the reference point of the object, relative to the current origin.Edit to change the X position of the object. X (first field) - the current X (horizontal) coordinate of the reference point of the object, relative to the current workspace origin.In the below properties listing, options that are not available as default settings in the Preferences dialog are noted as ' Properties panel only'.

Signal harness altium